地：知名市东海区桂城石肯文海围企业区网页 : xzwsjd.cn
Unit configuration features:Feeding trolley: It is composed of a car plate, a V-shaped material rack, an oil cylinder and a walking system; the steel plate is placed on the V-shaped material rack, and the hydraulic motor drives the trolley to the center of the decoiler, and the decoiler that the oil cylinder lifts the coiling plate Spindle center.Uncoiler: The main shaft expansion and contraction decoiler prevents the main shaft and the steel coil from slipping when working. The steel coil runs smoothly during the uncoiling process, and it is easy to realize the uncoiling control.Leveling machine: The drive motor adopts an AC frequency conversion motor, and the work roll is composed of three leveling rolls, which are driven by a motor, a reducer and a gear, which saves energy and reduces consumption, and starts smoothly.Deviation correction device: It is composed of a deviation correction roller, an adjusting screw and a hand wheel. The width can be adjusted to prevent the sheet from running off before entering the unit.Slitting machine: feeding the rollers to ensure smooth cutting of the sheet material. The use of an eccentric sleeve structure can greatly reduce the gap of the guide mechanism, so that the axial movement of the spindle is less than 0.01mm, and the radial gap is also less than 0.03mm. Improve the stability of the main shaft and ensure the precision of the shearing plate.Waste silk machine: It is composed of cycloid pin wheel reducer, transmission shaft and winding main wheel, used to collect waste silk after slittingShearing machine : The slitting machine feeds the steel plate to the plate shearing machine. When the set length is reached, the slitting machine stops running and sends a cutting signal to the plate shearing machine. After cutting, the slitting machine restarts and enters the next working cycle.